Whaley 25 ton circulating chiller RA25D-4-2P150T

Description

New price was ,526.
Original quotation can be provided.
Bought to chill large volumes of ethanol.
Never installed.
Located in Northern California.
Packaged Air Cooled Chiller
Model #: RA25D-4-2P150T
Nominal Tons: 25 Ton (9.74 tons at -4F Leaving Glycol Temp (LGT), 95F(35C) Ambient,
50% glycol)
BTU/hr: 300,000 (116,960 BTU/hr at -4F Leaving Glycol Temp (LGT), 95F(35C) Ambient,
50% glycol)
Pump Configuration: Dual
Voltage: 440-480/3ph/60hz
Unit FLA : 73
MCA: 91.25
MOCP: 100.0
Supply Pump HP: 5.0 HP
Circ Pump HP: 2.0 HP
Flow Rate: 60 gpm (can be revised if needed)
Insulated Poly Tank Size: 150gal
Length: 124"
Width: 60"
Height: 84"
Shipping Weight: 2,640 lbs
Number of Compressors: 2
Inlet/Outlet Connections: 2”
Unit Price: ,294.00 (excludes freight and options)
Standard Features:
• High Efficient R-404A Refrigerant
• Copeland Scroll compressor(s)
• Insulated stainless steel copper-brazed plate evaporator(s) (others available)
• Cast iron end suction centrifugal supply pump rated at 2.4gpm per ton at 100’TDH (stainless
available)
• Insulated polypropylene reservoir with fill port and liquid level sight glass (larger volumes
available)
• Thermostatic expansion valve, filter drier, sight glass installed on refrigerant circuit(s)
• Service ports and valves
• NEMA 4 control panel with digital temperature controller
• High and low pressure safety
• Single point power connection
Direct drive fan(s) made to run slower and more quiet
• Air-Cooled vertical air discharge fans minimizes operating sound
• Weather resistant fan motor made to survive in the elements.
• Highly efficient coil provides excellent heat transfer and low air resistance
• Energy Star qualified unit
• Assembled, plumbed, and wired on industrial epoxy-coated steel frame
• Refrigerant circuit(s) pressure tested for leaks with nitrogen charge
• Refrigerant circuit(s) vacuum tested for leaks to negative-psi pressure
• Refrigerant circuit(s) fully charged with refrigerant
• Hydronic circulation loop leak tested under full flow using the WHALE-SOFT™ Testing Platform.
• Complete systems fully run tested under heat load using the WHALE-SOFT™ Testing Platform